







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Winchester Homeowners Choose KraftMaid Construction
We’re an independent KraftMaid service provider in Winchester, NV: we install, repair, and refit KraftMaid cabinetry in real kitchens rather than acting as authorized dealers. What sets our KraftMaid work apart is the writing before the wrench: a written price before any work starts, a real arrival window, and a 365-Day Done Right Promise that comes with the job. We know how KraftMaid boxes, drawer slides, and finishes actually behave after years of desert heat and daily use, and we fix what fails. Call (844) 797-9439 for a free estimate.
Winchester is an unincorporated urban pocket wedged between Las Vegas and the Strip. Nearly all new construction here is redevelopment or infill on decades-old parcels governed by Clark County rather than a city hall, so a KraftMaid refit in Winchester runs through county permitting and inspection queues while being designed around mid-century utilities and lot lines that predate the surrounding high-rises. The housing stock is dominated by 1950s to 1970s low-rise ranch homes and small apartments, many with original plumbing and electrical, which is why most of our Winchester cabinet work is remodel rather than new build. On the older parcels along the east-west streets, we routinely find that added rooms and converted garages were built decades ago without permits, and that can turn a straightforward cabinet swap into a county inspection chain. We plan for that possibility up front instead of discovering it on demo day.
Penhallow Remodeling Winchester is independent of and not authorized by KraftMaid. Our technicians have up to 22 years of experience, and we quote every KraftMaid job in writing before we touch a cabinet.
Why Trust Penhallow Remodeling Winchester for Your KraftMaid Construction?

KraftMaid builds several distinct cabinet families, and they don’t fail the same way. The Vantage series uses a construction that shows its first wear at the drawer slide and box joint under heavy daily use. The Cabinetry Advantage line tends to reveal soft-close mechanism wear before anything structural goes. Deluxe and Marquee cabinets carry heavier door profiles and finishes that react differently to steam and sun. Our technicians work across all four series and recognize these patterns because they’ve handled them, not because a manual told them to look.
That familiarity matters for warranty-safe service. We match OEM-compatible hinges, slides, and drawer boxes so the fit and finish stay right, and we reinforce stripped screw holes rather than drilling new ones into the same soft material. When a part is obsolete, we say so and offer a quality equivalent instead of forcing a bad fit. Every job gets a written price up front, a defined arrival window, a clean site at the end, and a written guarantee on the work. That’s The Kingswell Way, and it’s part of the Kingswell family of companies operating to it since 2004. Each location is independently owned and operated.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Fix in Winchester
These are the failures we see most often on KraftMaid cabinets in Winchester kitchens. Each one has a real cause, and each one usually has a targeted fix rather than a full tear-out.
- Drawer box joint separation and slide failure on lower cabinets. Lower drawers take the most abuse, and in a kitchen with high humidity or years of heavy loading, the box joints can separate and the slide can bind or snap. In Vantage kitchens this often shows up first on the pot drawer. The fix is a fresh slide and, if the box is compromised, a replacement drawer box sized to the original opening.
- Door hinge screw pull-out and misalignment on MDF-core doors. MDF holds a screw well until it doesn’t. Repeated opening on a heavy door works the screw loose, the door sags, and it starts rubbing the frame next to it. We reinforce the holes with glued-in dowels or threaded inserts so the hinge mounts secure again, and we realign the door rather than shimming around the problem.
- Finish checking, peeling, or discoloration on painted and stained doors. Steam from a nearby dishwasher, heat from an oven, or direct desert sun through a west-facing window will break down a painted or stained finish over time. Marquee doors with darker stains are especially prone to fading on sun-exposed runs. Touch-up and refinish can restore most of it; where the substrate is failing, a door replacement keeps the rest of the cabinet.
- Soft-close mechanism failure in drawers and doors. When the soft-close piston dies, the drawer or door slams, and that repeated impact damages the box or the frame around it. Replacing the mechanism early stops the cascade. Cabinetry Advantage doors are the most common place we see this.
- Unpermitted prior work around the cabinets. On older Winchester parcels, we sometimes find that a wall was moved or a garage converted without permits decades ago, which affects how a new cabinet run can be anchored and what county inspection will require. We flag it before work starts so the price you get is the price you pay.
KraftMaid Parts & Our Repair-vs-Replace Approach

We source OEM KraftMaid parts for hinges, slides, and drawer boxes whenever they’re available, because the fit and finish hold up better and the cabinet stays true to what you bought. Parts aren’t stocked locally, so lead time varies by part and series, and we tell you the expected window in writing before we order. For obsolete parts, a high-quality aftermarket equivalent from brands like Blum or Grass can be a reliable, cost-effective alternative. We’ll tell you plainly which route makes sense.
On repair versus replace, the honest answer depends on the box. Solid-box KraftMaid cabinets are usually worth repairing: new hardware, reinforced hinge holes, and a new drawer box can add years. When multiple boxes or doors are failing at once, replacing those components rather than the entire kitchen is the recommendation that respects your money. Call (844) 797-9439 and we’ll give you a written price on the repair or replacement before anything comes off the wall.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We inspect the cabinet boxes, frames, doors, slides, and finish, and identify which KraftMaid series you have so the right parts get ordered. On older Winchester parcels we also check for prior unpermitted work that could affect anchoring or county inspection.
- 2
Written price and plan. You get a written price before any work starts, with the repair or replacement scope spelled out. No ballpark, no verbal number that changes at the door.
- 3
Repair or install. Technicians arrive in uniform within the arrival window we gave you, background-checked and ready. We reinforce stripped holes, fit OEM or equivalent parts, and set doors and drawers true.
- 4
Test and clean. Every drawer glides, every door closes soft, every hinge aligns. We leave the site cleaner than we found it.
- 5
Warranty. Every job comes with a written guarantee and the 365-Day Done Right Promise. If something fails inside the period, we come back and fix it at no charge, with a free return visit and no re-inspection fee.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Winchester

We work across the full KraftMaid lineup: Vantage, Cabinetry Advantage, Deluxe, and Marquee. That covers cabinet installation and refacing, full kitchen remodeling, and small or partial kitchen remodels. If you’re replacing a run of boxes, refacing doors and drawer fronts, or fitting a new island with the same series, we handle it as one written-price job.
Our materials come from brands we trust alongside KraftMaid: Cambria, Silestone, and Caesarstone countertops, and Kohler, Moen, Blanco, Delta, Toto, and Grohe fixtures, so what sits on the cabinet is as solid as the cabinet itself.
We Also Service These Brands
KraftMaid is one line of many we handle. We also work with Kohler, Cambria, Toto, and Silestone, which means your kitchen or bath isn’t limited by a single brand. If your KraftMaid cabinets pair with Cambria quartz counters and Kohler fixtures, we can install or repair all of it under one written price and one guarantee. Multi-brand experience keeps us honest about what’s worth repairing and what’s worth replacing.
FAQs – KraftMaid Construction Service in Winchester
Is Penhallow Remodeling Winchester authorized by KraftMaid? No. We’re an independent KraftMaid service provider, not an authorized dealer, and we say so plainly. Our credibility comes from hands-on installation and repair, not a manufacturer badge. Call (844) 797-9439 for a free estimate on your Winchester job.
Do you use genuine KraftMaid/OEM parts? We do whenever they’re available for hinges, slides, and drawer boxes, because the fit and finish hold up better. When a part is obsolete, we use a high-quality equivalent from brands like Blum or Grass and explain the trade-off in writing before we order.
How long does KraftMaid service take? A hardware or drawer-box repair usually finishes in a single visit. A refacing or cabinet replacement run takes longer, and we give you the real timeline in your written quote. Parts aren’t stocked locally, so lead time depends on the part and series. Call (844) 797-9439 to get your timeline.
What KraftMaid models/series do you cover? All four main series: Vantage, Cabinetry Advantage, Deluxe, and Marquee. We service and install across each, including cabinet installation and refacing, full kitchen remodels, and small or partial kitchen remodels.
Will service void my KraftMaid warranty? Warranty-safe work means using the right parts and correct installation, and that’s how we operate. We match OEM-compatible hardware and reinforce rather than drill fresh holes. If a prior installer’s work or an unpermitted change affects the cabinet, we tell you before we start. Call (844) 797-9439 to talk through your specific case.
How much does KraftMaid construction cost in Winchester? A small or partial kitchen remodel runs $9,000 – $20,000, a full kitchen remodel $14,000 – $45,000, and cabinet installation $4,000 – $13,000. Countertops add $2,000 – $6,500 and backsplash $800 – $2,500. Island installation runs $3,000 – $10,000. Every quote is a written number before work starts. Call (844) 797-9439 for an exact figure, estimates are free.
Book Your KraftMaid Service in Winchester, NV
Have a KraftMaid drawer that won’t glide or a door peeling near the handle? We’ll give you a written price before anything comes off the wall, arrive in the window we promised, and back the work with a 365-Day Done Right Promise. Call (844) 797-9439 for your free estimate in Winchester. A live person answers 24/7.
Written by the team at Penhallow Remodeling Winchester.












