







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterVanities, Tile & Fixtures in Winchester, NV
Vanities, tile, and fixtures are the three surfaces a bathroom is judged by – the vanity cabinet and countertop, the tile on the floor and shower walls, and the faucets, showerheads, and lighting that get touched every single day. A vanity swap with new tile and fixtures in Winchester typically runs $3,200-$11,500 depending on cabinet line, tile selection, and how much plumbing has to move. Most jobs here are finished in two to four days once materials land.
We do this work as part of Bathroom Remodeling, which means we’re not showing up to set tile over a floor that should have been addressed first. Call (844) 797-9439 and a real person answers, day or night. We write the price down before anyone picks up a pry bar, and that written number is what shows up on your invoice when the job is done.

When You Need Vanities, Tile & Fixtures
Most homeowners don’t wake up one morning and decide to re-tile a bathroom. They call us because something failed, or because they’re finally sick of looking at the same thing. Here’s what we see in Winchester:
- The vanity is sagging or water-swollen. Particleboard cabinet boxes in older Winchester homes absorb moisture from a slow drip under the sink and start to swell at the bottom. By the time the door won’t close flush, the cabinet is usually beyond repair.
- Grout lines are cracking or the tile has come loose. Nevada’s dry, hot summers and cooler winters push a lot of movement through a house. Tile that pops or grout that cracks in a straight line often means the substrate underneath has flexed, not that the grout was bad.
- A shower or tub surround has failed at the seams. Caulk is a wear item. When it lets go, water gets behind the tile and into the wall cavity. If you’re seeing soft drywall next to the shower or a musty smell that won’t leave, we’d want eyes on it before you re-tile over it.
- The fixtures are original and rebuilding them no longer pencils out. A 1990s builder-grade faucet that’s leaking from the base is often cheaper to replace than to rebuild. Same story with older shower valves that no longer have parts support.
- You’re selling or buying and the bathroom is the weak room. A dated vanity, cracked tile, and mismatched fixtures drag down a bathroom on an inspection report and in showings. A targeted refresh – new vanity, new floor tile, new fixtures – moves the needle more than a full gut for a fraction of the cost.
- You want the room to feel like this decade. That’s a legitimate reason. A well-chosen vanity, a larger-format floor tile, and new fixtures in a coordinated finish can make a small bathroom feel like a different room without moving a single wall.
Our Vanities, Tile & Fixtures Process
- Measure, look, and listen. We look at what’s there – the plumbing locations, the floor structure, the state of the substrate behind any tile we might be removing – and we ask what you actually want out of the room. No pressure, no upsell speech.
- Write the price before we start. You get a written price that covers the vanity, tile, fixtures, and labor. Not a range. Not a verbal ballpark. The number we write is the number on the invoice.
- Select materials with you. We work from recognized trade brands so the products behind the promise are as solid as the promise itself: KraftMaid and Wellborn cabinetry for the vanity, Cambria, Silestone, or Caesarstone quartz for the countertop, and Kohler or Moen for the fixtures. You’ll see the actual samples, not a catalog.
- Demo and prep. We pull the old vanity, tile, and fixtures. If we find water damage behind the tile or under the vanity, we show it to you with photos before we do anything to fix it. That’s the conversation that matters most – it’s also the one most contractors skip.
- Install properly. Cement board substrate (the moisture-resistant layer behind your tile) goes in before the tile does. We don’t set tile over drywall in a wet area. That one detail is the difference between a bathroom that lasts and one that’s back in front of you in three years.
- Clean up and walk it through. We leave the room cleaner than we found it, walk you through every fixture, and hand you the written guarantee. If something fails inside the 365-Day Done Right Promise, we come back and fix it at no charge – and if it’s a repair call, your second visit is free. No service fee, no re-inspection charge.
Every technician who walks into your home is background-checked and in uniform. You know who’s coming before they knock.

Vanities, Tile & Fixtures Pricing in Winchester
Here are honest ranges. These are real numbers, not teasers – actual scopes run at the low end are smaller vanities and simpler tile layouts, and the high end is a larger room with countertop upgrades and plumbing relocation.
| Item | Typical Range | What Moves the Number |
|---|---|---|
| Vanity cabinet (installed) | $650 – $2,400 | Stock vs. semi-custom; KraftMaid or Wellborn lines; single vs. double sink |
| Vanity countertop | $400 – $1,800 | Quartz vs. cultured marble; Cambria and Caesarstone sit higher than Silestone budget lines; edge profile |
| Floor tile (installed) | $900 – $2,600 | Tile material cost per sq ft, layout complexity, substrate repair |
| Shower wall tile (installed) | $1,200 – $3,800 | Standard field tile vs. large-format or mosaic; waterproofing method; niche work |
| Faucet / showerhead / trim (each) | $150 – $650 | Kohler vs. Moen finish line; single-handle vs. widespread; thermostatic valve upgrades |
| Full package (vanity + tile + fixtures) | $3,200 – $11,500 | Room size, plumbing relocation, substrate condition, chosen brands |
What drives cost up in Winchester: moving plumbing supply or drain lines is the biggest variable – it can add $400-$1,200 on its own. Taking the tile all the way to the ceiling in a shower adds material and labor. If the substrate behind the existing tile is water-damaged, that repair is real labor even though it’s not visible in the finished product. We’ll price it, not bury it.
What keeps it down: keeping the plumbing where it is, choosing a stock vanity line, and picking a floor tile that doesn’t require a complicated layout. A standard 4-inch tile laid straight is significantly cheaper than a herringbone or a large-format offset.
We don’t quote a price on the phone and we don’t want to. What we do is come out, look at the room, and put a written price in your hands before any work starts. Call (844) 797-9439 for a free estimate.
FAQs – Vanities, Tile & Fixtures
How much does a bathroom vanity and tile replacement cost in Winchester?
A vanity replacement with new floor tile and fixtures typically runs $3,200-$11,500 in Winchester, depending on the vanity line, tile selection, and whether plumbing has to be moved. The low end covers a stock vanity with a cultured marble top, standard floor tile, and one new faucet; the high end is a semi-custom kraft cabinet, quartz top, re-tiled shower walls, and full fixture package. Call (844) 797-9439 for an exact written quote – the estimate is free.
Can tile be installed over existing tile in a Winchester bathroom?
Technically yes, and sometimes it’s the right call – but only if the existing tile is sound, the floor deflection is within spec, and the height difference doesn’t create a trip hazard at the doorway. In most Winchester bathrooms, we recommend removing the old tile down to the slab and installing a proper substrate system. Tiling over failed tile is the fastest way to end up with a second problem a few months after the first one. We’ll tell you which approach makes sense for your specific room.
What’s the difference between repairing a fixture and replacing it?
If a Kohler or Moen faucet cartridge is still in production, rebuilding it is usually cheaper than replacing the whole fixture. Once the parts support is gone or the valve body has corroded, replacement is the better value. We’ll tell you honestly which side you’re on before we start. The free second visit on repair calls means if it doesn’t take, you don’t pay a second time. Call (844) 797-9439 and we’ll walk through it with you.
Do you use prefab or panelized options for vanities?
We don’t install prefab or panelized buildings – that’s a different trade entirely, and companies like Boxabl and Plant Prefab build structures, not bathroom vanities. For a bath refresh, we source cabinetry from KraftMaid and Wellborn and countertops from Cambria, Silestone, or Caesarstone. Those brands carry their own warranties, and we stand behind the installation behind them. For a broader look at what’s possible, our home remodeling projects page has the full scope of what we do.
Why Homeowners in Winchester Call Us Back
Most of the homeowners we work with in Winchester have already been through one project that went sideways. A contractor who said Tuesday and showed up Thursday. A price that grew after demo day. A repair that cracked again six weeks later. We built our process around those failures, not around the best-case scenario.
Here’s what that looks like when you work with us:
- Written price before any work starts. You hold the number we have to meet.
- 365-Day Done Right Promise. If the work fails within a year, we come back and fix it at no charge. Covered in writing on every project.
- Free second visit if the repair fails. No service call, no re-inspection fee.
- Live person answers 24/7. No voicemail maze, no callback window.
- Background-checked, uniformed technicians on every visit. You know who’s in your home.
- Parts sourced from recognized trade brands – so the product behind the promise holds up as well as the promise itself.
We operate under the Kingswell Guarantee, established in 2004: say the price before the work, show up in the window we gave, and leave the place cleaner than we found it. Every Penhallow location is independently owned and operated as part of the Kingswell family of companies. Our technicians have up to 22 years of experience, and that experience is why we don’t cut the substrate, don’t tarp over rotten wood, and don’t guess at plumbing.
If you want the bigger picture on how a bath refresh fits into a larger job, read more about Bathroom Remodeling in Winchester.
Call for a Free Estimate
If your bathroom vanity is sagging, the tile is cracking, or the fixtures are older than your kids, we should talk. Call (844) 797-9439 – a real person picks up, any hour. We’ll come out, look at the room, and hand you a written price for the vanity, tile, and fixtures before anything is pulled or set. No pressure, no verbal ballparks, no surprises after demo day.
We’re a general contractor serving homeowners who need kitchen remodeling, bathroom remodeling, and whole-home remodels. Vanities, tile, and fixtures are one piece of the larger picture – and we’re glad to walk you through the rest. Call today for a free estimate.
Written by the team at Penhallow Remodeling Winchester, serving Winchester.


